PTFE Bush Molded Cylinders
- Inner Diameter: 6 - 200 mm
- Outer Diameter: 12 - 250 mm
- Length: 100 mm
- Temperature (deg. Celsius): -20 to 80 Degree C
- Material: PTFE
PTFE and PTFE Bush are manufactured in a wide range of sizes. Many combinations of sizes of OD and ID are available. Molded cylinders are preferred for machining because compression molding yields greater material homogeneity for the finished part.
Most cylinders are molded to 100 millimeters in length, although other lengths are still available. All cylinders can be etched for bonding.
All cylinders can be made with filled (reinforced) PTFE to enhance the performance parameters of PTFE. Materials available for reinforcement are Glass Fiber, Carbon, Graphite, Bronze, Molybdenum Disulfide, and Stainless Steel.
Asbestos PTFE Packing
- Usage/Application: Industrial
- Working Temperature Range: -73 to 280 Degree C
- Density (g per sq. cm): 80
- Tensile Strength (Mpa): 100
- Pressure Range: 100 Bar
We offer large assortment of superior grade and high performing asbestos PTFE packing.
Features: - Provide excellent release
- Dimensional stability
- High anti-tensile strength
- Excellent abrasion resistance
- Excellent resist medicament property resist antistatic applied
- Coated fabrics using a variety of splices
- Impervious to virtually chemical attack
PTFE Sheet
- Usage/Application: Industrial
- Color: White
- Thickness: 1mm
- Material: PTFE
- Width: 200 - 220 mm
PTFE Sheets exhibit astonishing chemical resistance. PTFE is a self lubricating material that provides a low friction coefficient and is ideally suited for the manufacture of corrosion-resistant gaskets and seals. PTFE stands for PolyTetra Fluoro Ethylene, it is a fluorocarbon-based polymer. The Telfon brand of PTFE is manufactured only by Dupont.
PTFE Sheet
- Thickness: 1mm
- Usage/Application: Industrial
- Size: 300 x 300 mm, 600 x 600 mm
- Material: PTFE
PTFE Sheets exhibit astonishing chemical resistance. PTFE is a self lubricating material that provides a low friction coefficient and is ideally suited for the manufacture of corrosion-resistant gaskets and seals. PTFE stands for PolyTetra Fluoro Ethylene, it is a fluorocarbon-based polymer. The Telfon brand of PTFE is manufactured only by Dupont.
White Rubber PTFE Diaphragms
Approx. Rs 100 / Piece
- Color: White
- Material: PTFE
- Application: Industrial
- Shape: circular
- Country of Origin: Made in India
- Diameter: 12 to 900 mm
PTFE is one of the most chemically inert compounds, however, has very little elasticity, which can reduce flow rates upto 20%. A rubber back-up diaphragm is required to provide flexibility and memory. Many other materials, usually derivates of the above, have been developed by individual pump companies for use in their own pumps.
These PTFE protected diaphragms combine the chemical resistance associated with PTFE with the flex characteristics of an elastomer. The PTFE is chemically bound to the underlying rubber. Since it is manufactured as one piece, the risk of separation normally associated with two-piece overlaid diaphragms is eliminated, increasing time on-line. One-piece construction avoids the possibility of leakage and also prevents abrasive particulate material getting between the PTFE and rubber, which could cause damage and lead to reduced diaphragm lifetime.
We supply a wide range of PTFE lined rubber diaphragms which are used in all kinds of valves, pumps and actuators used in critical corrosive applications. The rubber used with PTFE linings are Neoprene, EPDM and Butyle
.Price depend on size.
PTFE Skived Sheet
- Size: 300 x 1500 mm
- Usage/Application: Industrial
- Material: PTFE
- Thickness: 0.1 to 3.5 mm
Skived sheet is ideal as a slide surface, for chute liners, other kinds of liners, or for cutting or stamping into gaskets (asbestos substitute) and diaphragms, including complex stamped gasket configurations.
The material may be ordered etched for bonding on one or both sides for an additional charge (both Sodium Ammonia and Sodium Naphthalene etching are offered). Material may be ordered in long lengths as individual sheets.
PTFE Rods
- Usage/Application: Industry
- Material: PTFE
- Color: White
- Diameter: 3 mm
PTFE Rods are available from 3mm diameter upto all the regular standard dimensions. RAM extruded PTFE rods are also available in all standard fills: glass fiber (5%, 10%, 15%, 20% and 25%), carbon, bronze and in different colors for fabricated product identification and safety.